The mSwitch™ Trunk Gateway lets you offer enhanced IP-based telephony services even as you migrate to a new infrastructure -without disrupting service or subscriber dialing patterns. The TG's main role is to serve as a voice/data/fax bridge between IP networks and legacy PSTN/ wireless networks. It functions seamlessly and transparently with the legacy PSTN, providing maximum scalability and cost-efficiency.
GENEW chassis XG(S)PON platform consists of OLT, ONT and ODN, represents a high-speed, fibre to the home or building or Curb (FTTH, FTTB, FTTC and etc.) alternative to Copper. For the smooth evolution from DSL to GPON/XG(S)-PON, GENEW's OLT platform supports coexistence of GPON service boards and XG(S)-PON service board. Also GENEW's OLT platform supports Combo-PON service board which included GPON+XG-PON and GPON+XGS-PON for the case of different GPON/ XG-PON/ XGS-PON service in the same ODN. Suppliers can smoothly evolve from GPON to XG(S)-PON in the same platform.
GENEW chassis XG(S)PON platform consist of OLT, ONT and ODN, represents a high-speed, fibre to the home or building or Curb (FTTH, FTTB, FTTC and etc.) alternative to Copper. For the smooth evolution from DSL to GPON/XG(S)-PON, GENEW's OLT platform supports coexistence of GPON service boards and XG(S)-PON service board. Also GENEW's OLT platform supports Combo-PON service board which included GPON+XG-PON and GPON+XGS-PON for the case of different GPON/ XG-PON/ XGS-PON service in the same ODN. Suppliers can smoothly evolve from GPON to XG(S)-PON in the same platform.
GENEW chassis XG(S)PON platform consists of OLT, ONT and ODN, represents a high-speed, fibre to the home or building or Curb (FTTH, FTTB, FTTC and etc.) alternative to Copper. For the smooth evolution from DSL to GPON/XG(S)-PON, GENEW's OLT platform supports coexistence of GPON service boards and XG(S)-PON service board. Also GENEW's OLT platform supports Combo-PON service board which included GPON+XG-PON and GPON+XGS-PON for the case of different GPON/ XG-PON/ XGS-PON service in the same ODN. Suppliers can smoothly evolve from GPON to XG(S)-PON in the same platform.
Availability: | |
---|---|
Quantity: | |
KT313-F intrinsically safe Mining wireless base station provides mobile phone wireless interface access, receive wireless signals from mobile phones, demodulated and extract the baseband data to the base station codec processing, then sent to cell phones and complete the voice and data exchange between the wireless terminal devices.
KT313-F intrinsically safe Mining wireless base station provides mobile phone wireless interface access, receive wireless signals from mobile phones, demodulated and extract the baseband data to the base station codec processing, then sent to cell phones and complete the voice and data exchange between the wireless terminal devices.
Standard power input: DC12V
Working Current: ≤1100mA;
Power consumption: <12W
Transmission Mode: Full duplex TCP/IP;
Working Frequency:
Uplink: 1920MHz~1980MHz
Downlink: 2110MHz~2170MHz;
Standard: IEEE802.11b/g/n;
Dual directional antenna, coverage radius 1000m
32 concurrent
Uplink 5.76Mbps / downlink 14.4Mbps
Single-antenna transmit power 200mw
Receiver sensitivity -118dBm
Maximum support 20 cascade
Weight: 10kg.
Standard power input: DC12V
Working Current: ≤1100mA;
Power consumption: <12W
Transmission Mode: Full duplex TCP/IP;
Working Frequency:
Uplink: 1920MHz~1980MHz
Downlink: 2110MHz~2170MHz;
Standard: IEEE802.11b/g/n;
Dual directional antenna, coverage radius 1000m
32 concurrent
Uplink 5.76Mbps / downlink 14.4Mbps
Single-antenna transmit power 200mw
Receiver sensitivity -118dBm
Maximum support 20 cascade
Weight: 10kg.
KT202-F1 intrinsically safe base station is used to receive wireless signals what the underground devices send, Based on WLAN and TCP/IP techniques, intrinsically safe mobile phone, intrinsic safety wireless camera, intrinsically safe wireless radio speakers and intrinsic safety location identification cards etc. Then process the voice information and data by converting into IP packages and finish transmission via Ethernet.
KT313-F intrinsically safe Mining wireless base station provides mobile phone wireless interface access, receive wireless signals from mobile phones, demodulated and extract the baseband data to the base station codec processing, then sent to cell phones and complete the voice and data exchange between the wireless terminal devices.
KT202-F1 intrinsically safe base station is used to receive wireless signals what the underground devices send, Based on WLAN and TCP/IP techniques, intrinsically safe mobile phone, intrinsic safety wireless camera, intrinsically safe wireless radio speakers and intrinsic safety location identification cards etc. Then process the voice information and data by converting into IP packages and finish transmission via Ethernet.
KT313-F intrinsically safe Mining wireless base station provides mobile phone wireless interface access, receive wireless signals from mobile phones, demodulated and extract the baseband data to the base station codec processing, then sent to cell phones and complete the voice and data exchange between the wireless terminal devices.