The mSwitch™ Trunk Gateway lets you offer enhanced IP-based telephony services even as you migrate to a new infrastructure -without disrupting service or subscriber dialing patterns. The TG's main role is to serve as a voice/data/fax bridge between IP networks and legacy PSTN/ wireless networks. It functions seamlessly and transparently with the legacy PSTN, providing maximum scalability and cost-efficiency.
GENEW chassis XG(S)PON platform consists of OLT, ONT and ODN, represents a high-speed, fibre to the home or building or Curb (FTTH, FTTB, FTTC and etc.) alternative to Copper. For the smooth evolution from DSL to GPON/XG(S)-PON, GENEW's OLT platform supports coexistence of GPON service boards and XG(S)-PON service board. Also GENEW's OLT platform supports Combo-PON service board which included GPON+XG-PON and GPON+XGS-PON for the case of different GPON/ XG-PON/ XGS-PON service in the same ODN. Suppliers can smoothly evolve from GPON to XG(S)-PON in the same platform.
Availability: | |
---|---|
Genew NuBiz GS220 Series is a new-generation intelligent gigabit access switch designed for carrier's IP MAN and enterprise networks. Based on the new-generation high-performance hardware and NuBiz platform, it supports functions such as ACL, QinQ and QoS. Its simple management mode and flexible installation can meet the requirement of any complicated scenarios.
Carrier-Level Ethernet Access Switch
GS220 Series supports the carrier-level Ethernet-ring protection protocol with less than 50ms recovery time, STP/RSTP/MSTP, backup uplink ports, and LACP link aggregation to cater to the requirements of high reliability of carriers;
GS220 Series has powerful ACL functions to access and control L2-L7 data based on physical port, providing carriers flexible and various policy control methods;
GS220 Series supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
GS220 Series supports various L2 multicast functions such as IGMP-snooping, fast-leave and MVR to fully meet the operation requirements of carrier’s IPTV.
Genew NuBiz GS220 Series is a new-generation intelligent gigabit access switch designed for carrier's IP MAN and enterprise networks. Based on the new-generation high-performance hardware and NuBiz platform, it supports functions such as ACL, QinQ and QoS. Its simple management mode and flexible installation can meet the requirement of any complicated scenarios.
Carrier-Level Ethernet Access Switch
GS220 Series supports the carrier-level Ethernet-ring protection protocol with less than 50ms recovery time, STP/RSTP/MSTP, backup uplink ports, and LACP link aggregation to cater to the requirements of high reliability of carriers;
GS220 Series has powerful ACL functions to access and control L2-L7 data based on physical port, providing carriers flexible and various policy control methods;
GS220 Series supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;
GS220 Series supports various L2 multicast functions such as IGMP-snooping, fast-leave and MVR to fully meet the operation requirements of carrier’s IPTV.
Specification:
Model | GS220-8T2S | GS220-24T4S | |
Interface | 8 GE ports, | 24 GE ports, | |
Console | 1 RJ45 port, 1 RST button | 1 RJ45 port, 1 RST button | |
Backplane | 20 Gbps | 56 Gbps | |
Forwarding rate | 15 Mpps | 42 Mpps | |
Chassis | Dimensions (WxDxH)(mm) | 280x180x44 | 440x210x44 |
Weight(KG)(empty ) | 1.55 | 2 | |
Package | Dimensions (WxDxH)(mm) | 346x289x92 | 555x295x88 |
Weight(KG) | 2.55 | 3 | |
Power consumption | no-load | <3W | <7W |
full-load | 10W | 20W | |
Power supply | AC: 100V-240V, 50Hz±10% | 15W | 25W |
Total output BTU (1000BTU/H=293W) | 51.19 | 85.32 | |
Fan number | no | ||
Noise@25°C(dBA) | 0 | ||
MTBF(H) | >50,000 | ||
Forwarding mode | Store-forward | ||
Flash (MB) | 16 | ||
DRAM (MB) | 128 | ||
MAC | 8K | ||
Buffer size(MB) | 4.1 | ||
Total SVI | 10 | ||
Specification:
Model | GS220-8T2S | GS220-24T4S | |
Interface | 8 GE ports, | 24 GE ports, | |
Console | 1 RJ45 port, 1 RST button | 1 RJ45 port, 1 RST button | |
Backplane | 20 Gbps | 56 Gbps | |
Forwarding rate | 15 Mpps | 42 Mpps | |
Chassis | Dimensions (WxDxH)(mm) | 280x180x44 | 440x210x44 |
Weight(KG)(empty ) | 1.55 | 2 | |
Package | Dimensions (WxDxH)(mm) | 346x289x92 | 555x295x88 |
Weight(KG) | 2.55 | 3 | |
Power consumption | no-load | <3W | <7W |
full-load | 10W | 20W | |
Power supply | AC: 100V-240V, 50Hz±10% | 15W | 25W |
Total output BTU (1000BTU/H=293W) | 51.19 | 85.32 | |
Fan number | no | ||
Noise@25°C(dBA) | 0 | ||
MTBF(H) | >50,000 | ||
Forwarding mode | Store-forward | ||
Flash (MB) | 16 | ||
DRAM (MB) | 128 | ||
MAC | 8K | ||
Buffer size(MB) | 4.1 | ||
Total SVI | 10 | ||
Models:
Application:
Models:
Application: