The mSwitch™ Trunk Gateway lets you offer enhanced IP-based telephony services even as you migrate to a new infrastructure -without disrupting service or subscriber dialing patterns. The TG's main role is to serve as a voice/data/fax bridge between IP networks and legacy PSTN/ wireless networks. It functions seamlessly and transparently with the legacy PSTN, providing maximum scalability and cost-efficiency.
GENEW chassis XG(S)PON platform consists of OLT, ONT and ODN, represents a high-speed, fibre to the home or building or Curb (FTTH, FTTB, FTTC and etc.) alternative to Copper. For the smooth evolution from DSL to GPON/XG(S)-PON, GENEW's OLT platform supports coexistence of GPON service boards and XG(S)-PON service board. Also GENEW's OLT platform supports Combo-PON service board which included GPON+XG-PON and GPON+XGS-PON for the case of different GPON/ XG-PON/ XGS-PON service in the same ODN. Suppliers can smoothly evolve from GPON to XG(S)-PON in the same platform.
Availability: | |
---|---|
GENEW GLP6600 Semi-active WDM system can provide operators with a cost-effective 5G network fronthaul solution. The central office is equipped with an active WDM device GLP6600-A-III, and the base station side is equipped with a passive WDM device. The WDM module can synthesize multiple optical fibers into one optical fiber for optical signal transmission, and can protect the line side optical fiber 1 + 1, establish a transmission network that can be controlled uniformly with the optimal network cost.
Performance:
- Power 1+1 redundancy
- Hot swap modular design
- Line side optical fiber 1+1 protection
- Support NETCONF + SSH Southbound interface protocol
GENEW GLP6600 Semi-active WDM system can provide operators with a cost-effective 5G network fronthaul solution. The central office is equipped with an active WDM device GLP6600-A-III, and the base station side is equipped with a passive WDM device. The WDM module can synthesize multiple optical fibers into one optical fiber for optical signal transmission, and can protect the line side optical fiber 1 + 1, establish a transmission network that can be controlled uniformly with the optimal network cost.
Performance:
- Power 1+1 redundancy
- Hot swap modular design
- Line side optical fiber 1+1 protection
- Support NETCONF + SSH Southbound interface protocol
Parameter | GLP6600-A-III | Remote passive module |
Size(H×W×D) | 132mm×483mm×293mm | 25mm×130mm×100mm |
Service slot | 12 | - |
Power consumption | <150W | - |
MUX/DEMUX Card | CWDM6:1、12:1,MWDM6:1、12:1,DWDM12:1、24:1 | CWDM6:1、12:1,MWDM6:1、12:1,DWDM12:1、24:1 |
Power Supply | DC:-36 V ~-72V;AC 90 V ~250V | - |
Remote passive module :
CWDM module:
MWDM module:
DWDM module:
Parameter | GLP6600-A-III | Remote passive module |
Size(H×W×D) | 132mm×483mm×293mm | 25mm×130mm×100mm |
Service slot | 12 | - |
Power consumption | <150W | - |
MUX/DEMUX Card | CWDM6:1、12:1,MWDM6:1、12:1,DWDM12:1、24:1 | CWDM6:1、12:1,MWDM6:1、12:1,DWDM12:1、24:1 |
Power Supply | DC:-36 V ~-72V;AC 90 V ~250V | - |
Remote passive module :
CWDM module:
MWDM module:
DWDM module: